Ratchet Type Load Binder
Safety, reliable design for easy operation.
No requirement for locking of handle than lever type load binder
High quality drop forged construction.
Heat treated for extra strength
Each binder individually proof tested.
G80 Master Link Assemblies (TH-32)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
G80 Master Link (TH-33)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
G80 Ratchet Binder with Safety Hook (TH-670)
■ According to EN12195-3.
■ Handle: forged.
■ Suitable for G80 chain.
■ With G80 eye grab hook with safety pin.
■Not for lifting, only for lashing
PRESS STEEL WIRE ROPE SLINGS
The specification of the wire rope used by the following working load in the table Dia 6mm-60mm use the construction of 6X37(b)-1670; Dia 62mm-120mm use the construction of 8X61(b)-1670; Dia 122mm-190mm use the construction of 8X91(b)-1670.
Different construction of the rope means different working load, we can calculate the working load with the steel wire rope construction that the customer required.
The sling's breaking load is 5 times of its working load.
The pressed type for the rope with dia 90mm is pressed two aluminum ferrule on each end of the sling
G80 Eye Sling Hook with Cast Latch(TH-334)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
Turnbuckles U.S. Federal Specification (FF-T-791B, TYPE1, FORM1)
Turnbuckle assembly aombinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw & Jaw and Eye.
End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
Hot dipped galvanized.
Lock Nuts available for all sizes.
G80 Eye Self-Locking Hook with Grip (TH-77)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.