G80 Screw Pin Alloy Bow Shackle (TH-758)

G100 European Type Connecting Link (TH-1001)

G100 European Type Connecting Link (TH-1001),Powder coated, different colour is available as per request.,Working load limit permanently shown on the body.,Max proof load is 2.5 times of the working load limited.,Min. Breaking strength is 4 times of the W.L.L.

MESH SOCK JOINTS

MESH SOCK JOINTS

SPEK TYPE ANCHOR

POWERNEEMA ROPE 8 strands and 12 strands

POWERNEEMA ROPE,Specific Gravity: 0.97g/cm2(Float),Melting Point: 145°C,Elongation at break: 3.5-4%,Water Absorption: None,UV resistance: Good,Abrasive resistance: Good,Chemical corrosion resistance: Super Good,POWERNEEMA ROPE is produced with imported ultra high molecular weight polyethylene (UHMWPE) fiber, the superior features are including:,Stronger: under the same diameter, the strength is the same as the wire rope.,Lower elongation: the breaking elongation is close to the wire rope.,Lighter: under the same strength, the weight (g/m) is only 1/8 of the wire rope, 1/4-1/5 of the Nylon or Polyester Rope, 18%-20% of the Polypropylene Rope.,Smaller: under same strength, the diameter  of the POWERNEEMA ROPE is 55%-60% of the Nylon Rope or Polyester Rope, 45% of the Polypropylene Rope.,It will non-rotating, anti-kinking, aging resistance and chemical corrosion resistance.,Application: port towing, mooring system for ultra large container ships/LNG/VLCC/VLOC, Army&Navy equipment, offshore, aerospace, sports equipment, electrical communications, large precision object sling, etc

01 Chain Swivels

01 Chain Swivels,Forged carbon steel,Quenched & tempered &Hot dipped galvanized,Ultimate load is 5 times of the working load limit

SH MODEL HOIST WITH ELECTRIC TROLLEY (2/1 ROPE REEVING)

SH MODEL HOIST WITH ELECTRIC TROLLEY (2/1 ROPE REEVING),

Four Legs Chain Sling

Standard: GB20652,It can be used as one leg choker chain sling when the hook is inside the link, but the working load will be reduced 20%.,Safety factor: 4:1

SNATCH BLOCK

SNATCH BLOCK,DY,Single Wheel

CHAIN CALIBRATION MACHINE FOR G80 CHAIN

CHAIN CALIBRATION MACHINE FOR G80 CHAIN,Machine for the calibration of round chains. Round steel chains are automatically set with a given testing force or to a given length while being calibrated and test. One chain link as stamped at each setting stroke.

Ratchet tie down

-According to EN12195-2：2001,-Min. Breaking Strength (M.B.S) stripe：each stripe is equal to 1 tonne M.B.S,-Each set is packed in plastic with CE declaration of conformity, other packing is available at other's request.,-The cargo lashing are not designed for overhand  lifting or towing.,-more than standard length is available at order's request.,-Different end fitting is available with different cost.

GROUNDING BLOCK

GROUNDING BLOCK,Note:,Grounding wire and pile provide additionally